Kid’s Blanket Poncho DIY


Hi everyone! Sara here from Made by Sara with my monthly contributor post. I hope you are having a great beginning to this wonderful Holiday season! It’s my favorite time of the year. I love all the coziness and all the good feelings that surrounds it.

A few weeks ago I was going through my kid’s last winter clothes to make a list of all the things I need to make them (or to buy them, because I love shopping almost as much as I love sewing). One of the things my kids needed was some sort of a blanket they could wear at home.

I grabbed a few yards of fleece that were laying on my fabric stash for a while (it was actually a couple of fleece blankets I got on a sale for a very good price) and whipped up a quick & easy blanket poncho!

And what better than a blanket poncho? A blanket poncho with a toy pocket!

So, today I am sharing with you an easy tutorial on how to make a quick 2-seam kid’s poncho!

You will need

  • 1 yard of fleece
  • 3.5 yeards of bias tape

How to make it


Step 1- Cut two 21”x21” squares of fleece. Place them on top of each other making sure to align all the edges. Draw a 6”x6” square in one of the corners (which will be the top part of the poncho). Mark 1 1/2” along the two lines of the square on the fabric edges. Draw a concave curve between those two marks to form the neck opening. Then draw two smaller convex curves on the sides, from the marks to the fabric edges, to form the shoulder line. Cut along the curves.

Alternative: If you find it easier just cut a straight line. Mark 5” (instead of 6”) on both sides of your upper corner and draw a straight line that goes from one to the other. Cut and you’re ready to go.

The harder part is done. Phew! Now let’s sew!


Step 2- Sew the two squares together, right sides together, starting at the shoulder’s marks (the 1 1/2” marks) stitch along down the edge with a 3/8” seam allowance. Stop at the tip. Turn right sides out.


Step 3 – Cut a triangle of fleece that is about 10 inches long on each outer side and 15 inches across. It has to match precisely your poncho’s bottom edges, so use it as a guide. Sew bias tape along the top edge of the triangle pocket piece. Now place that piece on top of the poncho’s front piece, matching the two edges, and baste it at 1/4”.


Tip: Use a round object, like a plate, to make the bottom corner of your poncho round. This will make it easier to stitch the bias binding later!


Step 5- Measure your neck opening all around and cut a strip of bias tape with the same measurement plus 1 inch (it should be about 21”).


Step 6- Cut a 2.75” strip of bias tape. Stitch it all around the four edges.

You’re done!

Tip: The two last steps are optional. You can skip adding bias tape to the neck opening and side edges as an embellishment. Fleece doesn’t fray so you don’t have to finish the edges.  If you opt not to finish the edges with bias tape then make the pocket as follows: sew the pocket to the front piece (right side of the pocket piece with wrong side of the front piece) with a 3/8” seam allowance. Trim it to 1/4”. Turn the pocket piece to the right side. Top stitch.

This poncho fits kids with 4-6 years-old (average measurements). You can make them longer by adding the same amount of inches on For smaller sizes cut 19”x19” squares and for bigger sizes cut 23”x23” squares.

My kids loved their blanket ponchos! They look so cozy and warm in them.

Share your blanket ponchos over Peek-a-Boo’s Pages Facebook group.

Happy Thanksgiving!


Leave a Reply

Your email address will not be published.



Get 25+ FREE

Sewing Patterns


The Coupon Code for the 25+ Free Patterns is in your E-mail.



Keep enjoying our Blog or check out our Website

for great deals on sewing patterns and fabric!