3-Step DIY Sewing Machine Cover

DIY Sewing Machine Cover
Have you noticed the organizing frenzy in the blogosphere lately??? It motivates me to clean up my craft corner a bit with a DIY Sewing Machine Cover. Now my sewing machine has a nice new outfit for the times when I don’t manage to get it put away:)
 
If you’re looking for a sewing machine or have questions about using one, take a look at our Sewing Machine Blog Post
 

DIY Sewing Machine Cover | How to Make a Sewing Machine Cover

 
DIY Sewing Machine Cover

I love it and the DIY Sewing Machine Cover only took a couple of minutes. Perfect!

Sewing Machine Cover Fabric and Materials

Pick your fabric- probably the most time-consuming part! I went pretty neutral since my sewing corner is in our front room. For my Brother machine, I used a 28×22″ piece.  I assume most machines are about the same size, but you might want to measure. You need enough to go up and over the machine and meet on both sides. Leave a little wiggle room:)
 

Sewing Machine Cover Instructions

Machine Cover Step 1: Fold in half with right sides together and sew up the side seams

3-Step DIY Sewing Machine Cover

Machine Cover Step 2: Try it on your machine and from corners like you’re wrapping a present. Pin along the fold line and then sew across your pin line.

3-Step DIY Sewing Machine Cover

Machine Cover Step 3: Fold the raw edge under twice and hem the bottom

3-Step DIY Sewing Machine Cover
 
 Finished!
3-Step DIY Sewing Machine Cover
 
Now you can have a bit of cleanliness in your craft corner …or if you’re lucky your craft room:)

Sewing Machines to Use the Cover With

Do you need a sewing machine to put under it. If so, check out the following:

Also, make sure to join our sewing community at the Peek-a-Boo Pattern Shop Facebook Group.

5 Responses

Leave a Reply

Your email address will not be published. Required fields are marked *

Share
Pin2