Hello Nap Time Crafters! My name is Cherie and I have a lil blog called you & mie where I blog about sewing and crafting, an occasional recipe or personal story, but mostly about my current passion, kids clothing.
I’m so excited to be here with you with you while Amy is on maternity leave. Projects for newborns have a special place in my heart because the arrival of my daughter is what really catapulted me into the world of sewing. And now I can’t imagine my life without either! Today I’m going to show you how to make a stimulating Black and White Mobile for your baby’s changing table.
Out of aaaaall of the things that I made for my daughter when she was an infant, the one that was the most loved and the most used was a mobile similar to this. She. Loved. It. She was so mesmerized by the high contrast designs – we actually called it “the babysitter” for awhile because she could just lay there and stare at it forever!
|Not a newborn anymore, but the only model I had on hand – and she was still pretty intrigued!|
Studies say that newborns can best register black, white and red in high contrasting patterns. These designs stimulate their eyes and promote brain development. This is probably most beneficial during the first 3-4 months of life, though my daughter loved hers well past her first birthday (we had to keep adjusting the height so she couldn’t reach it)! Because these designs stimulate (not soothe), this mobile would be best
placed over a changing table or play area as opposed to a crib.
So let’s get started! Here’s what you’ll need:
An embroidery hoop (10 inches)
Paint and paint brush
White and black felt (I like wool or wool blend)
I bought this 10 inch hoop at Joann’s and at full price it was $1.50. You can use polyester felt, but I prefer wool or wool blend felt because it’s thicker and will make the squares stiffer.
I bought 1/8 of a yard in white and black. Luckily I had the rest of the supplies at home already, so between the felt and the hoop (and a couple of coupons), I only spent about $3.50. Not bad . . .
So the first step is to separate the two hoops. One has some hardware on it and you can toss that in your “stuff I swear I’ll find a purpose for someday” pile (please tell me you have one too). The other hoop should have nothing on it. Paint your hoop with acrylic paint or spray paint. A couple of coats will ensure a nice opaque finish. I went with black because I thought the dark circle against the white ceiling would add another visual element of interest. But you can paint it whatever you color you want!
Set the hoop aside to dry and cut your felt into 4×4 inch squares. You’ll need 6 white ones and 4 black ones.
Let’s also cut your embroidery floss. The lengths I give here are based on what I needed (determined by the height of my ceiling and my changing table), so you may need to make adjustments. I used one piece that was 90 inches and 4 pieces that were 50 inches.
Sketch out some designs for your mobile pieces.
These were my original sketches, though some of the designs came out different. I’m going to walk you through the 5 designs I made, but you can be as creative as you want!
1. Cut out strips of white felt and lay them down diagonally on a black square.
2. Cut a piece of white felt 4 inches long. Draw 4 wavy lines, cut them out and lay them on a black square.
3. Draw nine circles on some black felt (trace a coin). Originally I made them all the same size, but before I sewed them on I decided to make 4 of them smaller. A nickel and a dime might be about right.
4. Draw concentric circles about 1/2 inch apart on black felt and create a target design on a white square
5. This is probably the most complicated one. First cut two black 2×2 inch squares. Keeping in mind that 2 of the sides of the square will be part of the seam allowance (dashed line), draw a small square in the “middle.” Carefully cut the square out, repeat with the other black square and arrange as shown. Don’t forget that you’ll lose a 1/4 inch on all four sides!
Now top stitch all the felt designs on and trim anything extra felt hanging off the edge of the square. Take your time with the circles and curved shapes.
Here’s what they should like at this point:
(Notice the change I made in the 9 circles design)
Put those aside while we prep the other 5 squares, which will be the back pieces. Felt doesn’t generally have a right and wrong side, but I’ve labeled them just in case you’re using something that does.
Use a ruler to find the center of the square and mark it on the wrong side. Measure about a 1/2 cm to either side of the center to make a 1 cm line.
short threads to a 1/2 inch above the knot. Be sure not to cut the two
long threads!!! You’ll need those to hang the mobile.
|Baby’s eye view|